For You Lot Norris Airplane Restoration

Here is a Norris A6 I bought. It was inwards a deplorable the world alongside 3 kind out cracks inwards the bring upward handle. The pic inwards a higher house shows it afterward beingness glued upward alongside epoxy resin, all the excess gum as well as irregularities bespeak sanding smooth. I worked from 240 grit through to 600 grit.
This was followed yesteryear five sparse coats of shellac applied alongside a stuff thence left to harden for a few days. This surafce was thence worked alongside 400 grit until matt all over as well as thence worked all the means through to 4,000 grit micromesh. The end coat was alongside a carnauba wax to give a overnice protective sheen. The rosewood was a overnice surprise as well as this was a pleasing restoration.

My aim was to endure out the forest equally natual looking equally possible, I didn't sand likewise difficult leaving equally many of the one-time bumps as well as knocks equally I could. The rubbing out removed all of the telltale stuff marks as well as left the surface matt thence that the application of wax exclusively raised a sheen as well as non a high gloss finish.

Share this post